DFT mechanistic study of the H2‐assisted chain transfer copolymerization of propylene and p‐methylstyrene catalyzed by zirconocene complex

DFT computations have been performed to investigate the mechanism of H₂‐assisted chain transfer strategy to functionalize polypropylene via Zr‐catalyzed copolymerization of propylene and p‐methylstyrene (pMS). The study unveils the following: (i) propylene prefers 1,2‐insertion over 2,1‐insertion both kinetically and thermodynamically, explaining the observed 1,2‐insertion regioselectivity for propylene insertion. (ii) The 2,1‐inserion of pMS is kinetically less favorable but thermodynamically more favorable than 1,2‐insertion. The observation of 2,1‐insertion pMS at the end of polymer chain is due to thermodynamic control and that the barrier difference between the two insertion modes become smaller as the chain length becomes longer. (iii) The pMS insertion results in much higher barriers for subsequent either propylene or pMS insertion, which causes deactivation of the catalytic system. (iv) Small H₂ can react with the deactivated [Zr]?pMS?PP_n facilely, which displace functionalized pMS?PP_n chain and regenerate [Zr]? H active catalyst to continue copolymerization. The effects of counterions are also discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 576–585     

100 MeV质子束流品质诊断及剂量测量准确性评估方法研究

质子辐射生物学效应是太空放射生物学和质子束放疗研究的重要基础，可为空间环境下人员的危险性评估以及质子治疗优化设计提供科学依据。依托加速器建立相应的生物样本辐照技术是开展此类研究的前提条件。中国原子能科学研究院最近建立的100 MeV强流质子回旋加速器提供的中能质子束流为目前国内能量最高，特别适合用于太空放射生物学和质子治疗相关研究。本研究中，利用在束和离线等多种手段建立了中能质子束流诊断和剂量测量方法，对加速器引出的100 MeV质子照射野大小、均匀性等束流品质以及剂量测量系统准确性进行了分析和评估。结果表明，对光子剂量响应好的LiF(Mg, Ti)热释光探测器，对90 MeV质子同样具有良好的剂量响应关系，可作为中能质子剂量准确性评估的手段之一。在5.0 cm×5.0 cm照射野范围内，加速器引出的100 MeV质子束流的均匀性好于90%，在线剂量测量系统准确性好于93%，束流品质和剂量测量条件基本满足辐射生物学的要求，可为质子辐射生物学效应研究的开展提供可靠保障。     

Microelectromechanical Systems for Nanomechanical Testing: Electrostatic Actuation and Capacitive Sensing for High-Strain-Rate Testing

Experimental Mechanics - There have been relatively few studies on mechanical properties of nanomaterials under high strain rates, mainly due to the lack of capable nanomechanical testing devices....     

激光能量对反钙钛矿GaCMn_3薄膜结构与物性的影响

本文采用脉冲激光沉积方法在LaAlO3(001)单晶衬底上制备了反钙钛矿GaCMn3薄膜,通过控制制备过程中脉冲激光的能量,研究了不同激光能量条件对GaCMn3薄膜结构与物理性能的影响.分别利用X射线衍射仪、原子力显微镜、超导量子干涉仪和物理性能测试系统,对所制备的薄膜的晶体结构、表面形貌和磁性、电输运性质进行了研究.结果表明,制备的样品均为具有多个晶面取向的反钙钛矿薄膜,且薄膜结构和物性明显随制备激光能量的变化而变化.当激光能量为450mJ时,制备的薄膜多晶面取向性最弱,结晶性和表面形貌最优良.实验所得的薄膜均表现出顺磁-铁磁-反铁磁相转变,然而转变过程比块材较平缓,同时薄膜的电阻率并未表现出块材中的突变特征,我们推测该现象很可能是由衬底的应力及衬底的晶格膨胀对薄膜反常晶格变化的抑制作用造成的.     

砂岩方梁断裂过程区范围的实验确定方法

裂纹前端的断裂过程区是引起岩石非线性断裂及尺寸效应的主要原因。利用数字图像相关技术对砂岩开展了三点弯曲梁实验,获得观测区域高精度的全场位移和应变数据,根据断裂韧带区域水平位移和水平应变的分布特征,结合裂尖岩石颗粒变化的微观分析,提出采用裂纹尖端水平位移波动性和水平应变突变性所得到的波动系数和水平应变突变值,确定断裂过程区形状和临界尺寸的方法。结果表明:砂岩断裂过程区的形状为不规则的狭长带状区域,断裂过程区的临界长度为11~13mm,临界宽度为1.58~2.36mm。断裂过程区区域内形变在趋向裂尖时呈指数增加,但其单位区域内的形变增量呈波动状态。该方法能够更加准确判断岩石断裂过程区的范围,有助于分析岩石的非线性断裂特性。     

CoFeSiB非晶丝弱磁场测量仪的研制

设计了以Co基非晶丝为敏感元件的传感器探头,多谐振荡励磁电路,信号处理电路,单片机显示电路,且对该磁场测量仪进行了标定。     

山东大学(威海)开展的核物理研究

综述了山东大学威海校区原子核物理研究团队在原子核精细谱学、核天体物理、探测器研制和高能核物理等方向开展的研究工作及最新进展；尤其重点介绍了$A\sim 110$核区原子核的形状共存和带交叉延迟，“订书机”和“雨伞”模式转动带，碳氮氧循环过程中关键核反应的测量进展，中子星参数化的状态方程及双中子星并合引力波研究，带电粒子探测器的设计与制作，相对论重离子碰撞物理中量子输运理论和高阶反常输运等研究工作，并展望了下一步的工作重点。     

Water-induced formation of an alkali-ion dimer in cryptomelane nanorods

Tunneled metal oxides such as α-Mn₈O₁₆ (hollandite) have proven to be compelling candidates for charge-storage materials in high-density batteries. In particular, the tunnels can support one-dimensional chains of K⁺ ions (which act as structure-stabilizing dopants) and H₂O molecules, as these chains are favored by strong H-bonds and electrostatic interactions. In this work, we examine the role of water molecules in enhancing the stability of K⁺-doped α-Mn₈O₁₆ (cryptomelane). The combined experimental and theoretical analyses show that for high enough concentrations of water and tunnel-ions, H₂O displaces K⁺ ions from their natural binding sites. This displacement becomes energetically favorable due to the formation of K²⁺ dimers, thereby modifying the stoichiometric charge of the system. These findings have potentially significant technological implications for the consideration of cryptomelane as a Li⁺/Na⁺ battery electrode. Our work establishes the functional role of water in altering the energetics and structural properties of cryptomelane, an observation that has frequently been overlooked in previous studies.

Water displaces potassium ions and initiates the formation of a homonuclear dimer ion (K²⁺) in the tunnels of hollandite.     

A New Method of Testing and Evaluating the Quality of Refined Montan Wax: Digital Color and GC Fingerprint

To establish a new method of testing and evaluating the quality of refined montan wax (RMW), digital color and GC fingerprint technology were introduced and applied. CIE Lab color mode was used to digitize the exterior colors of RMW, and the score obtained through a fitting function was also used to reflect its quality. It is shown that they were in complete accord with the human visual perception trend. The GC fingerprint was used to characterize the internal chemical information of RMW, and the composition of its internal features was reflected through the relative retention time (RRT) and relative peak area (RPA) values. It is shown that there was a high degree of similarity between the fingerprints, while certain differences also existed. This can be used to implement effective application of RMW to aspects such as quality control, adulteration identification, and origin attributions.